Comtrol ES7528 - Manual (Page 193)

RocketLinx ES7528 User Guide: 2000509 Rev. C Warnings (CLI) - 193
Configuration Using the Command Line Interface (CLI)
Event Selection
Event Selection
Switch(config)# warning-event
coldstart Switch cold start event
warmstart Switch warm start event
linkdown Switch link down event
linkup Switch link up event
authentication Authentication failure event
fault-relay Switch fault relay event
poe-powering Switch PoE powering or unpowered event
power Switch power failure event
sfp-ddm Switch SFP DDM abnormal event
super-ring Switch super ring topology change event
time-sync Switch time synchronize event
Example:
Cold Start event
Switch(config)# warning-event coldstart
Set cold start event enable ok.
Example:
Link Up event
Switch(config)# warning-event linkup
[IFNAME] Interface list, ex: fa1,fa3-5,gi25-28
Switch(config)# warning-event linkup fa1gi2
Set fa5 link up event enable ok.
Display
Switch# show warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4-5
Link Up: fa4-5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disabled
PoE Powering:
SFP DDM: Enabled