Comtrol ES7528 - Manual (Page 184)

184 - Traffic Prioritization (CLI) RocketLinx ES7528 User Guide: 2000509 Rev. C
Configuration Using the Command Line Interface (CLI)
CoS-Queue Mapping (Continued)
Display – CoS-
Queue mapping
Switch# sh qos cos-map
CoS to Queue Mapping :
CoS Queue
---- + ------
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
DSCP-Queue Mapping
Format
Switch(config)# qos dscp-map
PRIORITY Assign an priority (63 highest)
Switch(config)# qos dscp-map 0
QUEUE Assign an queue (0-7)
Format: qos dscp-map priority_value queue_value.
Map DSCP 0 to
Queue 1 Switch(config)# qos dscp-map 0 1
The TOS/DSCP to queue mapping is set ok.
Display – DSCO-
Queue mapping
Switch# show qos dscp-map
DSCP to Queue Mapping : (dscp = d1 d2)
d2| 0 1 2 3 4 5 6 7 8 9
d1 |
-----+----------------------
0 | 0 0 0 0 0 0 0 0 1 1
1 | 1 1 1 1 1 1 2 2 2 2
2 | 2 2 2 2 3 3 3 3 3 3
3 | 3 3 4 4 4 4 4 4 4 4
4 | 5 5 5 5 5 5 5 5 6 6
5 | 6 6 6 6 6 6 7 7 7 7
6 | 7 7 7 7