Comtrol ES7528 User Manual
Page 97
Advertising
RocketLinx ES7528 User Guide: 2000509 Rev. C
VLAN Configuration - 97
Configuration Using the Web Interface
This figure displays how to configure the Egress rule of the ports.
Use the following steps to configure Egress rules:
1.
Select the VLAN ID. The entry of the selected VLAN turns to light blue.
2.
Assign Egress rule of the ports to U or T.
3.
Press Apply to apply the setting.
If you want to remove one VLAN, select the VLAN entry and then click the Remove button.
Advertising