Cisco XR 12406 User Manual
Page 186
Advertising
Chapter 5 Maintaining the Router
Removing and Replacing an AC PDU
5-22
Cisco XR 12406 Router Installation Guide
OL-13831-01
Step 6
Remove the blower module (
a.
Lift the blower module handle to its raised (carrying) position.
b.
Loosen the (4) captive screws on the blower module.
c.
Remove the blower module by grasping it on each side and pulling it straight
back from the chassis.
Figure 5-11
Removing the Blower Module
101115
HIGH SPEED BLO
WER
Advertising