Cisco XR 12406 User Manual
Page 189
Advertising
5-25
Cisco XR 12406 Router Installation Guide
OL-13831-01
Chapter 5 Maintaining the Router
Removing and Replacing an AC PDU
Step 13
Reinstall the power supplies (
):
a.
Push the power supply into its bay until it mates with its PDU connector.
Caution
To prevent damage to the connectors, do not use excessive force when inserting
the power supply into the chassis.
b.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis.
c.
Repeat steps a. and b. for the second power supply.
Figure 5-14
Seating the AC Power Supply
84373
Advertising