Cisco XR 12406 - Manual (Page 241)

B-5
Cisco XR 12406 Router Installation Guide
OL-13831-01
Appendix B Repacking the Router
Repacking the Router
Figure B-2 Securing the Router to the Pallet Base
To repack the router, follow these steps:
Step 1 Place the router on the pallet base.
Step 2 Install the two anchor clips on the front of the chassis (see Figure B-2 ):
a. Set the hold-down clips in the bottom holes of the rack-mounting flanges on
either side of the chassis.
b. Align the bolt holes in the anchor clips with the bolt holes in the pallet base.
c. Insert and loosely tighten the bolts to secure the anchor clips to the pallet
base.
SL OT -0
GIGABI T ROUTE PR OCESSOR
SL OT -1
CO LL
LIN K TX
RX RJ -45
MII
RE SE T
AU X
EJ EC T
CO NS OL E
CISCO 12000 SERIES GIGABIT SW ITCH ROUT ER
57679