Cisco XR 12406 - Manual (Page 200)

Chapter 5 Maintaining the Router
Removing and Replacing a DC PDU
5-36
Cisco XR 12406 Router Installation Guide
OL-13831-01
Step 6 Remove the PDU from the chassis ( Figure 5-22 ):
a. Loosen the (4) captive screws on the PDU.
b. Grasp the PDU and pull it out slightly.
c. Move the PDU to the left and pivot the right side through the opening to
remove the PDU from the chassis.
Note Tilting the PDU at a slight angle makes it easier to remove it from the
chassis.
Figure 5-22 Removing the DC PDU
57995