Cisco XR 12406 - Manual (Page 46)

Chapter 1 Cisco XR 12406 Router Overview
Line Cards
1-30
Cisco XR 12406 Router Installation Guide
OL-13831-01
Figure 1-13 AC Power Distribution Unit
Depending on whether the router is configured for nonredundant or redundant
power operation, the router ships with either one or two 14-foot (4.3-m) AC power
cords to connect the PDU to the facility AC power source. AC power cords with
different source AC power plugs are available. (See
Figure 2-3 on page 2-16 .)
Note For true redundancy, connect each power supply to a separate power circuit
protected by its own circuit breaker.
1 Captive screw 4 AC power distribution unit
2 AC power cord receptacle A 5 Guide pin
3 AC power cord receptacle B 6 Blower module connector
57650
4
1
3
2
5
6