Cisco XR 12406 - Manual (Page 187)

5-23
Cisco XR 12406 Router Installation Guide
OL-13831-01
Chapter 5 Maintaining the Router
Removing and Replacing an AC PDU
Step 7 Remove the PDU from the chassis ( Figure 5-12 ):
a. Loosen the (4) captive screws on the PDU.
b. Grasp the PDU and pull it out slightly.
c. Move the PDU to the left and pivot the right side through the opening to
remove the PDU from the chassis opening.
Note Tilting the PDU at a slight angle makes it easier to remove it from the
chassis.
Figure 5-12 Removing the AC PDU
Step 8 Install the new PDU and tighten its (4) captive screws to secure it to the chassis.
57676