CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 116)

ADSL IP DSLAM
108
5. Configuration Backup and Restore
6
This chapter describes how to back up your user configuration from ADSL IP
DSLAM onto your computer and restore them from computer to ADSL IP
DSLAM using configuration file “sf_user.cfg”. This chapter will cover the
description of control files used in TFTP operation and process of backing up
and restoring:
Configuration File “sf_user.cfg”
The configuration “sf_user.cfg” is for ADSL ports, bridge and SNMP settings.
As soon as you restore it in ADSL IP DSLAM, it can be applied the next time
ADSL IP DSLAM is booted.
Control Files used in TFTP Operation
In TFTP operation, you may require some specific files to achieve
authentication functions. They will be provided with a CD in the packing. Listed
bellows are the control files used in TFTP operation:
tftplock.key : The file contains the SNMP write community string (password)
tftputil.bat : The utility file designed for user to back up and restore easily.
Note:
(1) You can follow the following procedures of configuration backup and
configuration restore in Windows 2000 and Windows NT system, whereas
you should have tftp.exe in other Windows system.
(2) Before you back up or restore the configuration file “sf_user.cfg”, make sure
if those two control files and configuration file are in same directory.
Configuration Backup
This section describes how to back up your configuration settings form ADSL
IP DSLAM to computer. The following procedures will help you to back up
configuration:
Step 1: Open a terminal emulation interface in order to execute CLI.
Step 2: Enter the command “upgrade enable” in Command Line Interface for