CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 82)

ADSL IP DSLAM
74
InitFailureTrapEnable: enable
ATU-R:
Thresh15MinLofs: 30 seconds
Thresh15MinLoss: 2 seconds
Thresh15MinLprs: 2 seconds
Thresh15MinESs: 5 seconds
Yes or No <y/n>
Note: the configuration of default dsl profile named “default” is as follows:
ATU-C:
1. Thresh15minlofs: 0
2. Thresh15minloss: 0
3. Thresh15minlols: 0
4. Thresh15minlprs: 0
5. Thresh15miness: 0
6. Initfailuretrapenable: enable
ATU-R:
1. Thresh15minlofs: 0
2. Thresh15minloss: 0
3. Thresh15minlprs: 0
4. Thresh15miness:0
Modifying DSL Profile and Alarm Profile
Modifying DSL Profile
Describes how to modify existing DSL profile but you cannot modify default
profile.
Command: config lineprof <profile name>
Argument List: the same as Creating DSL Profile. See page 71.
Example: This example shows how to modify the existing DSL line profile
named service512K64K.
IPDSLAM # config lineprof service512K64K
(lineprof-atuc)# 2 2 6 128 512 1
(lineprof-atur)# 2 2 6 32 64 1
ADSL Line Profile “service512K64K” content:
ATU-C:
Rate Mode: adaptAtStartup
LineType: Interleaved
TargetSnrMargin: 6
MinTxRate: 128
MaxTxRate: 512
MaxInterleaveDelay: 1
ATU-R:
Rate Mode: adaptAtStartup