CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 88)

ADSL IP DSLAM
80
Displaying the Current Status and Information of ADSL Line
Displaying the Current Status of Line
Describes how to show the Administration, operating, alarm and trap status.
Command: show port <all |port no.>
Argument List:
Parameter Description
all
Show all information.
port no. (1 ~ 16). Indicate the specific port.
Example: This example shows how to display the current status of port 8.
IPDSLAM # show port 8
1. Port ID: 1/8
2. Admin Status: up
3. Operating Status: up
4. Alarm Status: Normal
5. Trap: disable
The following example shows how to display the all port status.
IPDSLAM # show port all
Port ID Admin Status Operating Status Alarm Status Trap
----------------------------------------------------------------------------------------
1 up up Normal enable
2 up up Normal enable
. … …
16 up up Normal enable
----------------------------------------------------------------------------------------
Press ‘y’ for continue, ‘n’ for break and press Enter.
Table 4-12 “show port” Field Definition
Items Description
Port ID
The specific ADSL IP DSLAM port no (port no.).
Admin Status The desired state of interface (up/down)
Operating Status The current operational state of interface
(up/down)
Alarm Status Alarm status…normal means “no alarm”
Trap enable/disable.
Displaying the information of ADSL Line
Describes how to get the information of line coding, line type, standard
compliance, channel mode and which line profile and alarm profile have
attached at the specific ADSL line.
Command: show adslline <all | port no.>