CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 36)

ADSL IP DSLAM
28
3.7 Configuring ADSL IP DSLAM
This section describes how to configure your ADSL IP DSLAM by selecting
System from EmWeb Menu. This section will cover all the function from
System Menu. It includes:
Configuring Port Filtering {Set Port Filter}
Allow you to configure the port filtering function.
1. Click on “Set Port Filter” from the System Menu.
The Set Port Filter screen appears as follows:
2. Click on Enabled button to allow each ADSL port to communicate back and
forth with the uplink Ethernet port only.
By selecting Disabled button you allow all ADSL ports to communicate with
each other and also with the uplink Ethernet port.
3. Press Apply button in order to submit your configuration.
Note: Make sure to save all the configurations in flash by selecting Save to
Flash from main menu when you want to restart your ADSL IP DSLAM.