CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 45)

ADSL IP DSLAM
37
2. Click on Modify button to configure the specific port, says port1. The screen
will appear as follows:
3. Configure the VPI, says 0
4. Configure the VCI, says 50
5. Configure the Administration status of PVC “Up” or “Down”, says “Up.
6. Configure the RFX1483 Mode. Here in example, “Bridge” is configured.
7. Configure the Tag, says 7.
8. Configure the priority of PVC, says 7. The priority of 0 to 7 is from the lowest
to the highest.
9. Click on the Apply button to submit your changes, or click on the Cancel
button. If you want to clear all the values you have configured.