6 port configuration, Enabling and disabling a port, Attaching dsl profile – CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual
Page 87
ADSL IP DSLAM
79
4.6 Port Configuration
Enabling and Disabling a port
Describes how to enable and disable a port.
Command: config port <all | port no.> <up | down>
Argument List:
Parameter
Description
all |port no.
Select destination
up | down
Enable/Disable ADSL port
Example: This example shows how to set the port 8 enable.
IPDSLAM # config port 8 up
Yes or No <y/n>? y
Attaching DSL Profile
Describes how to attach a profile to a port.
Command: config adslline < port no.> <lineProfile> <alarmProfile>
Argument List:
Parameter type Parameter
data-type and
field
Description
port no.
(1 ~ 16)
Indicated ADSL IP DSLAM port no.
LineProfile
String, <=32
Specifies an ADSL line profile name.
AlarmProfile
String, <=32
Specifies an ADSL alarm profile name.
Example: This example shows how to attach the profile “service 512K64K” and
alarm profile “test” to port 8, and displays the result:
IPDSLAM # config adslline 8 service512K64K test
LineProfile: SERVICE512K64K
AlarmProfile: TEST
Yes or No <y/n>?