CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 39)

ADSL IP DSLAM
31
3.8 DSL Line Configuration
This section covers how to create, display, modify, or delete the line profile
and alarm profile by selecting DSL Line Configuration from EmWeb Menu.
This section will cover all the function from DSL Line Configuration Menu.
Creating a Line Profile {Create Line Profile}
This section describes how to create an ADSL line profile.
1. Click on “Create Line Profile” of DSL Profile configuration Menu.
The Create Line Profile screen appears as follows:
Table 3-3 Create Line Profile Field Definitions
2. Configure the name of line profile, say service512K64K.
3. Configure the line profile on CO side (Down Stream). For example,
4. Configure the line type, transmit rate adaptation, target SNR margin,
minimum transmit rate, maximum transmit rate, and interleave delay as
Field Definition
Line Type
The ADSL line type, Fast or Interleaved
Transmit Rate
Adaption Defines what form of transmitting rate to be
adaptated, fixed or adaptAtStartup
Target Snr Margin (db) Target Signal / Noise Margin.
Minimum Transmit
Rate
The minimum transmitting rate of ATU-C side or
ATU-R side.
Maximum Transmit
Rate The maximum transmitting rate of ATU-C side or
ATU-R side.
Interleave Delay
(mili-seconds) The value of Interleave Delay for this channel.