CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 64)

ADSL IP DSLAM
56
Table 4-1 CLI Command - Action List
<action> Description
show
Used to view information of the selected identifier and
parameters.
add Used to add configuration of objects according to the identifier
and parameters. Parameters are used for selecting specific
facility and arguments. For example, “16” specifies the 16
th
port
of ADSL IP DSLAM.
config Used to set or modify existing configuration of objects
corresponding to the identifier and parameters. But lineprof
name -default and alarmprof name default can not be
configured.
delete Used to delete configuration of objects corresponding to the
identifier and parameters. If the delete action is confirmed, the
configuration of objects will no longer exist.
help Used to view the detailed usage of CLI commands.
history Used to view the list of CLI commands that the user have used.
reset Used to reset a port of system.
restart Used to restart the system.
save Used to save the configuration to Flash RAM.
default Used to restore the default setting to system.
upgrade Used to upgrade the system file.
exit Used to terminate the CLI.
Table 4-2 CLI Command – Identifier List
<identifier> Description
sysinfo
Allow users to view or config the whole system information of
ADSL IP DSLAM.
sysip Allow users to view or config IP of system.
snmp Allow users to view or config VID and community for SNMP.
time
Allow users to view or config the current system date and
time.
sntp Allow users to view, add, delete or config sntp.
user The users’ information of system.
password Allow users to modify him (herself) password.
subscriber
Allow users to view, add, delete or config the basic
information of the subscriber of each port.
event Allow users to view the events of system.
trapdest Allow users to view, add or delete the trap destination.
manip Allow users to view, add, or delete management IP groups.
portfilter Allow users to view or config port-filter status.
port
Allow users to view or config status and information of each
port, or allow users to enable/disable port.
route
Allow users to view, add or delete the routing node in the
routing table.
connection
Allow users to view or config the connection information of
each port sorting by port id.
vid Allow users to view the vid information sorting by VLAN ID.
lineprof Allow users to view, add, delete or config ADSL line profile.
alarmprof
Allow users to view, add, delete or config the alarm threshold
values in an ADSL.
adslline Allow users to view or config the information of ADSL line.