CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 97)

ADSL IP DSLAM
89
4.7 Management Configuration
Configuring SNMP Access Parameters
Displaying SNMP
Describes how to display the information of SNMP.
Command: show snmp
Example: This example shows how to display the information of SNMP.
IPDSLAM # show snmp
1.VID: 4094
2.Community: public
Table 4-18 “show snmp” Field Definition
Field Definition
VID SNMP VID
Community SNMP Community
Modifying SNMP
Describes how to modify the SNMP.
Command: config snmp <community> [VID]
Argument List:
Parameter type Parameter data-type
and field Description
Community String, <32 SNMP Community
VID 2 ~ 4094 VID for SNMP.
Note: The community string is case-sensitive.
Example: This example shows how to modify SNMP with community string
“public” and no VID
IPDSLAM # config snmp public
VID: 0
community: public
Yes or No <y/n>?
This example shows how to modify SNMP with the configuration of community
string - “private” and VID – “4025”