CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 74)

ADSL IP DSLAM
66
Port-Filtering Configuration
Displaying Port-Filtering
Describes how to display the status of port-based VLAN.
Command: show portfilter
Example: This example shows how to view the status of port-based VLAN
IPDSLAM # show portfilter
Port filter: enable
Table 4-7 “show portfilter” Filed Definition
Items Description
Enable/ disable
Enable: Allow each ADSL port to communicate back
and forth with the uplink Ethernet port only.
Disable: Allow all ADSL ports to communicate with
each other and also with the uplink Ethernet port.
Modifying Port-Filter
Describes how to configure port-filtering function whether to allow each ADSL
port communicate with the uplink Ethernet port only or communicate with each
other and so do with the Ethernet port.
Command: config portfilter <enable|disable>
Argument List:
Parameter type Parameter
data-type and field
Description
Status Enable/disable Enable: Allow each ADSL port to
communicate back and forth with the
uplink Ethernet port only.
Disable: Allow all ADSL ports to
communicate with each other and
also with the uplink Ethernet port.
Example: This example shows how to enable the portfilter and allow each
ADSL port to communicate with the uplink Ethernet port only.
IPDSLAM # config portfilter enable
Yes or No <y/n>?
This example shows how to disable the portfilter and allow all ADSL port to
communicate with each other and also with the uplink Ethernet port.
IPDSLAM # config portfilter disable
Yes or No <y/n>?