PRG DMX Reference Guide 5.4 - Manual (Page 105)

DMX512 REFERENCE GUIDE 97
021 Sensors
9 Monitor Lens 3 Sensor
8 Monitor Lens 2 Sensor
7 Monitor Lens 1 Sensor
6 Monitor Strobe Sensor
5 Monitor Fixed Gobo Sensor
4
Monitor Rotating Gobo Wheel Index Sensor
and Gobo Orientation Sensor
3 Monitor Color Plate 2Y sensor
2 Monitor Color Plate 2X sensor
1 Monitor Color Plate 1Y sensor
0 Monitor Color Plate 1X sensor
022/
023
Pan/Tilt
9
Display current most significant digit (Xxxx) of
the reported encoder value.
Repeatedly monitored.
8
Display current second significant digit (xXxx)
of the reported encoder value.
Repeatedly monitored.
7
Display current third significant digit (xxXx) of
the reported encoder value.
Repeatedly monitored.
6
Display current least significant digit (xxxX) of
the reported encoder value.
Repeatedly monitored.
0
Display scrolling snapshot of each digit of the
reported encoder value. Repeatedly monitored.
024
Form &
Function
0
Display the form and function value of the lumi-
naire. For the VL7, Py=F10 should be reported
where y is the luminaire’s port number.
Table 4-8: VL7/VL7U Default Test Programs
Test Number Test Functions
31 Pan and Tilt
701 Pan 25% Speed
702 Tilt 25% Speed
39 VL7 Functions
703 Beam 25% Speed
705 Edge 25% Speed
709 Rotating Gobo
506 Wheel 1 Continuous Frame
507 Wheel 2 Continuous Frame
003 Beam Test
004 Lens Test
Table 4-7: VL7/VL7U Mechanical Tests (Continued)
Test Number Test Parameter Error Codes/Comments