PRG DMX Reference Guide 5.4 - Manual (Page 65)

DMX512 REFERENCE GUIDE 57
Series 200 Hanging Methods
Series 200 Two-Point Hang (Standard)
A two-point hang is the standard hanging method for Series 200 luminaires.
VL2C Luminaire
Figure 3-4: VL2C Two-Point Hang
VL4 Luminaire
Figure 3-5: VL4 Two-Point Hang
Series 200 Three-Point Hang
A three-point hang is required when the trusses move or tilt in any way during the show. This method of hanging
prevents the luminaires from slipping or twisting on the truss and thereby altering their focus. In some cases a cross-
brace and a third truss hook can be used, but in most cases an adjustable truss coupling plate will be required.
Figure 3-6: Three-Point Hang
VL2HANG
VL4HANG
8.49 in
216 mm
Requires use of right-angle
(90 degree) truss hook here