PRG DMX Reference Guide 5.4 - Manual (Page 108)

100 DMX512 REFERENCE GUIDE
009 Rotating Gobos
9
Cycle from wheel position 0 to
position 1 CW, from position 1 to
position 0 CCW repeatedly. Pause
briefly on position 0 and 1
8
Cycle from wheel position 0 to
position 5 CCW, from position 5 to
position 0 CW repeatedly. Pause
briefly on position 0 and 5
7
Cycle from wheel position 0 to
position 3 CW, from position 3 to
position 0 CCW repeatedly. Pause
briefly on position 0 and 3
6
Cycle from wheel position 0 to
position to position 6 CCW, from
position 6 to position 0 CCW
repeatedly. Pause briefly on posi-
tion 0 and 6
5
Continuous wheel position CW to
next gobo position on wheel (from
2 to 3, 5 to 0) Gobos on wheels do
not rotate. Pause briefly on each
gobo
4
Cycle gobos between orientation
0° & 180°
3
Spin gobos CW (100%) wheel
does not move
2
Spin gobos CW (50%) wheel does
not move
1
Spin gobos CW (25%) wheel does
not move
0
Spin gobos CW (100%) wheel
does not move
010 Strobe Test
9 Strobe to EOT stop (65%) (CLSD)
8
Strobe to middle position between
EOT Stop (66%) (OPEN)
7
Strobe open to closed stop repeat-
edly (25%) (i.e. cycling)
6 Cycling (35%)
5 Cycling (45%)
4 Cycling (55%)
3 Cycling (65%)
2 Cycling (75%)
1 Cycling (85%)
0 Cycling (Full Speed)
Table 4-9: VL7B/VL7UB Spot Luminaire Mechanical Tests (Continued)
Test Number Test Parameter Error Codes/Comments