PRG DMX Reference Guide 5.4 - Manual (Page 39)

DMX512 REFERENCE GUIDE 31
Figure 2-7: Smart Repeater / Smart Repeater Plus
SMRTVWS
Circuit breaker protection
for each output connector.
Output connector providing
power and signal to individual luminaire
via luminaire lamp cable.
Neon power indicator for each output.
Red Response LED indicates
valid data on response lines.
Red Transmit LED
indicates activity and
valid data on transmit line.
Trunk Cable Connector-
19-Pin Socapex. Accepts
power from dimmer rack.
Series 200 lamp
cable data input.
AC input Indicator.
Red and Green LED
Red and Green LED
Eight-Segment Display
for diagnostics.
Thumbwheel Switch
sets start address
for six output addresses
to luminaires.
Reply Indicators.
Broadcast Indicators.
Smart
Repeater
Smart
Repeater Plus