VACUUBRAND PC 620 NT plastic housing User Manual
Page 46
Advertising
page 46 of 113
Has the pump been exposed to media which may damage
the pump materials or form
deposits?
- Check and clean pump heads if necessary.
Has the pressure transducer been exposed to media which
may form deposits?
- Clean pressure transducer at the CVC 3000 controller
if necessary.
Long-term:
- Take measures as described above regarding short-
term shutdown.
- Separate the pump from the application.
- Close inlet and outlet ports (e.g., with transport caps).
- Close the gas ballast valve.
- Drain catchpots.
- Store the pump under dry conditions.
Advertising
This manual is related to the following products: