VACUUBRAND PC 620 NT plastic housing - Manual (Page 55)

page 55 of 113
The screen-shot shows the factory-set values.
When selecting ”Graphic” the display shows a pressure vs. time curve.
The timeline in the diagram adapts automatically to the process time.
+
Press the selection knob twice to return to the standard display.
10 mbar
00:03:50
Pump down
Temporary switching from ”Pump down” to ”Vac control” (only if
control is running):
+
Press ”MODE” key. The controller switches to ”Vac control” function,
the current vacuum is used as set value.
+
The preset function of the controller does not change due to this tem-
porary switching. When pressing ”START/STOP” key, the controller is
set again to the ”Pump down” function.
Pump down
Minimum
Off
Delay Off
Duration Off
- - - - - - Graphic - - - - - -
- - - - - - - Back - - - - - - -
760 Torr