4 checking the configuration, 5 checking the configuration -29 – Nortel Networks 8000 User Manual

Page 111

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

5 Logical interface configuration

Nortel Secure Router 8000 Series

Configuration -WAN Access

Step 2

Run:

interface vi rtual-template vt-number

The command creates a VT and the VT view appears.

Step 3

Run:

broadcast-limit link number

The command configures the maximum link number supported by the virtual template for
sending multicast or broadcast packets.

The multicast or broadcast packets sent out from each link may affect the system performance
if there are too many links in the virtual template.

Using the

broadcast-limit link

command, you can restrict the packets since the packets are

dropped when the link number exceeds the maximum number.

OQ NOTE

Nortel recommends that you do not configure multiple services such as MP, L2TP, and PPPoE on a VT.

By default, the maximum link number is 30 for the virtual template.

--- End

5.3.4 Checking the configuration

Run the following commands to check the previous configuration.

Action

Command

Check the status of a VT.

display interface virtual-template

[ vt-number

] [

|

{

begin

|

exclude

|

include

} regular-expression

]

Check the status of a virtual
access interface.

display virtual-access

[ va-number

|

peer

peer-address

|

slot

slot-number

|

user

user-name

|

vt

vt-number

] *

Run the

display interface virtual-template

command. The configuration succeeds when the

configuration of a VT appears. For example:

<Nortel> display interface virtual-template 3

Virtual-Template3 current state : UP

Line protocol current state :UP (spoofing)

Description : NORTEL, Nortel Series, Virtual-Template3 Interface

The Maximum Transmit Unit is 1500 bytes

Internet Address is 1.1.1.1/24

Link layer protocol is PPP

LCP initial

Physical is None, baudrate is 64000 bps

QoS max-bandwidth : 64 Kbps

Output queue : (Urgent queue : Size/Length/Discards) 0/50/0

Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0

Output queue : (FIFO queue : Size/Length/Discards) 0/256/0

Last 5 minutes input rate 0 bytes/sec, 0 packets/sec

Last 5 minutes output rate 0 bytes/sec, 0 packets/sec

5-10

Nortel Networks Inc.

Issue 5.3 (30 March 2009)

Advertising