Nortel Networks 8000 User Manual
Page 346
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
[RouterA-Serial1/0/0] quit
Step 2
Configure Router B,
# Configure Serial 1/0/0.
<RouterB> system-view
[RouterB] interface serial 1/0/0
[RouterB-Serial1/0/0] link-protocol fr
[RouterB-Serial1/0/0] fr interface-type dce
[RouterB-Serial1/0/0] fr dlci 100
[RouterB-fr-dlci-Serial1/0/0-100] quit
[RouterB-Serial1/0/0] quit
# Configure Serial 2/0/0.
[RouterB] interface serial /0/0
[RouterB-Serial2/0/0] link-protocol fr
[RouterB-Serial2/0/0] fr interface-type nni
[RouterB-Serial2/0/0] fr dlci 300
[RouterB-fr-dlci-Serial2/0/0-300] quit
[RouterB-Serial2/0/0] quit
# Configure the FR switching PVC.
[RouterB] fr switching
[RouterB] fr switch pvc1 interface Serial1/0/0 dlci 100 interface Serial2/0/0 dlci 300
[RouterB-fr-switching-pvcl] quit
Run the
display fr switch-table
command to view the switching PVC configuration and
status.
<RouterB> display fr switch-table all
Total PVC switch records:!
PVC-Name
Status Interface(Dlci)
pvcl
Active Serial1/0/0(100)
> Interface(Dlci)
Serial2/0/0(300)
Step 3
Configure Router C.
# Configure Serial 1/0/0.
<RouterC> system-view
[RouterC] interface serial 1/0/0
[RouterC-Seriall/0/0] link-protocol fr
[RouterC-Seriall/0/0] fr interface-type nni
[RouterC-Seriall/0/0] fr dlci 300
[RouterC-fr-dlci-Seriall/0/0-300] quit
[RouterC-Seriall/0/0] quit
# Configure Serial 2/0/0.
[RouterC] interface serial 2/0/0
[RouterC-Serial2/0/0] link-protocol fr
[RouterC-Serial2/0/0] fr interface-type dce
[RouterC-Serial2/0/0] fr dlci 200
[RouterC-fr-dlci-Serial2/0/0-200] quit
[RouterC-Serial2/0/0] quit
# Configure the FR switching PVC.
[RouterC] fr switching
8-56
Nortel Networks Inc.
Issue 5.3 (30 March 2009)