Ommands to control the balano – A&D GR Series GR-300 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ommands to Control the Balano
CAL
Calibration command
Balance performs calibration using the internal weight.
Command
Z J
■■
CAL
Reply
(Balance is calibrated)
M C L
Command to delete all stored data.
Command
Reply
M C L C
r
>-F
(<AK> code is replied)
M D
n n n
OFF
O N
R N G
Command to delete data of data number nnn.
Command
M D ; 0 2 5
Reply
(<AK> code is replied)
Display OFF command
If the balance is ON, it will turn OFF.
If the balance is already off, nothing will happen.
Command
lO F F C
r
Cp
Reply
(Balance turns off)
Display ON command
If the balance is OFF, it will turn ON.
Command
O N
Reply
(Balance turns on)
Same as the ON:OFF key, Display ON/OFF command.
The balance turns on (ortums off). The command works as the ON:OFF|key.
Command
Reply
PF
f
(Balance turns on or off alternately)
P R T
Same as the [PRINT key, Print command
The command works as the PRINT key.
Command
Reply
P R T
(A data is output)
Same as the | RE-ZERO key, RE-ZERO command.
The balance will display zero. The command works as the | RE-ZERO; key.
Command
R %
Reply
(Zero is displayed)
Same as the [RANGE key, Range command.
The range can be changed. The command works as the [RANGE key.
Command
Reply
R N G C
r
Lp
(Sample weight is stored in the balance)
Serial Interface
page 59
16, Command