A&D GR Series GR-300 - Manual (Page 67)

Display Error code Description of the error
C___ _ n
L I I ill U
•* - . f
L I I ill I
C - i~
L > » ЬI Ь
er r or I
r 111 r
L I I L L
EC, E06
EC, E07
EC, E11
EC, E16
f n 1 r
■ L r i L c
EC, E17
EC, E20
EC, E21
Format error
A command includes incorrect data.
Confirm command.
ex. Data is numerically incorrect.
Range error for a parameter
The received data exceeds the range that the
balance can accept.
Confirm parameter range of command.
Internal condition information
There is no problem when displaying it a few
seconds and returning to weighing mode.
Turn the balance off then on again, if the
information is continuously displayed.
Stability error
The balance can not stabilize due to an environ-
mental problem. Press the | CAL, key to return to
the weighing mode.
Prevent vibration, drafts, temperature changes,
static electricity and magnetic fields.
Read "Precautions for Installing the Balance"
on page 5 and "Caution during Use" on page 6
and be well informed on how to use the bal­
ance.
Internal weight error
This is a calibration error.
Confirm that there Is nothing on the pan and
retry the calibration or calibration test.
Internal weight error
This is a calibration error.
Retry the calibration or calibration test.
Calibration error
The calibration weight is too heavy. Press the
CALI key to return to the weighing mode.
Calibration error
The calibration weight is too light. Press the
CAL I key to return to the weighing mode.
Over load
This is a warning that a weight beyond the
balance capacity has been placed on the pan.
Remove the weight from the pan.
17. Care and error codes Page 66
Maintenance