Ditch Witch JT9 - Manual (Page 100)

JT9 Operator’s Manual
Systems and Equipment - 99
Drilling Fluid
CMW
®
Drilling Fluid
For productive drilling and equipment protection, use these recommended Baroid
®
products, available
from your Ditch Witch
®
dealer.
• Soda ash
• Quik-Gel
®
dry powder bentonite (p/n 259-804)
• E-Z Mud™ liquid polymer (p/n 259-805)
• Liqui-Trol™ liquid polymer suspension (p/n 259-808)
• Quik-Trol
®
dry powder polymer (p/n 259-809)
• Bore-Gel
®
drilling fluid (p/n 259-807)
• Con-Det™ water-soluble cleaning solution (p/n 259-810)
Guidelines
Match drilling fluid to soil type. This chart is meant as a guideline only. See your local Ditch Witch dealer for
soil conditions and drilling fluid recommendations for your area. Also see our interactive Drilling Fluid
Formulator at www.ditchwitch.com.
Polymer
This drilling fluid additive provides excellent lubrication and increases viscosity in average soils and heavy
clay. In swelling clay, polymer can reduce swelling that traps pipe in the bore.
There are two types of polymer:
• long chain such as Baroid EZ-Mud
• medium chain such as Baroid Quik-Trol
®
Improper handling or use of chemicals may result in illness, injury, or equipment
damage. Follow instructions on labels and in material safety data sheets (MSDS).
Soil type Drilling fluid recommendation
smooth, flowing sand bentonite or Bore-Gel + medium chain polymer
coarse sand or light soil bentonite or Bore-Gel
heavy clay long chain polymer + Con-Det
swelling clay long chain polymer + Con-Det
rock Bore-Gel