Shut down unit, Jt9 operator’s manual – Ditch Witch JT9 User Manual
Page 64
Advertising
JT9 Operator’s Manual
Drive - 63
Shut Down Unit
CMW
®
Shut Down Unit
1.
Stop track movement.
2.
Lower drill frame and stabilizer to the ground.
3.
Run engine at low throttle for 3 minutes to cool.
4.
Turn key to STOP.
5.
Remove key.
IMPORTANT: If frame and stabilizer
cannot be lowered, use cylinder locks,
chocks (shown), or other suitable
material to block the tracks. Remove
cylinder locks or chocks before driving
unit.
Advertising