Jt9 operator’s manual – Ditch Witch JT9 User Manual
Page 114
Advertising
JT9 Operator’s Manual
Systems and Equipment - 113
Quick Wrench
CMW
®
To Join
1.
Scribe straight line across joint on both
sides of separating line (A).
2.
Scribe second line (B) on moveable side of
joint in the opposite direction of tightening
action .25” (6 mm) away from first line.
3.
Turn handle until second line (B) meets first
(A).
4.
Turn handle opposite direction two turns to
relieve pressure.
5.
Remove quick wrench components.
To Break
1.
Turn handle until joint is broken.
2.
Remove quick wrench components.
Advertising