Drill first pipe, Jt9 operator’s manual – Ditch Witch JT9 User Manual
Page 81
Conduct a Bore - 80
JT9 Operator’s Manual
Drill First Pipe
CMW
®
Drill First Pipe
1.
Turn on drilling fluid.
2.
Visually check for drilling fluid flow.
3.
Turn drill bit to starting position. See “Prepare Entry Point” on page 58.
4.
Slowly move carriage forward. See “Prepare Entry Point” on page 58. Take care to steer to drill
straight in line with drilling unit. Drill in downhole tools and 1/3 of first pipe before steering.
5.
Monitor gauges.
Turning shaft can kill you or crush arm or leg. Stay away.
To help avoid injury:
•
Keep everyone at least 10’ (3 m) away from turning drill string.
•
Push rod or pipe slowly. Forcing can bend string. Do not use bent rod or pipe.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.