Jt9 operator’s manual – Ditch Witch JT9 User Manual
Page 24
Advertising
JT9 Operator’s Manual
Controls - 23
Set-Up Console
CMW
®
2.
Right track control
To move forward, push.
To move backward, pull.
To stop, move to center.
3.
Stabilizer and frame tilt
control
To raise stabilizer and
increase frame tilt, push.
To lower stabilizer and
decrease frame tilt, pull.
Note: Stabilizer control lowers the
front of the drill frame along with the
stabilizer.
4.
Tracker control key
To allow tracker operator to
stop thrust and rotation, move
key to enable position (up).
To override tracker control
mode, move key to disable
position (right).
IMPORTANT: Remove key and keep
in tracker operator’s possession.
Item
Description
Notes
c00ic148h.eps
Advertising