Ditch Witch JT9 - Manual (Page 137)

Service - 136
JT9 Operator’s Manual
Startup/10 Hour
CMW
®
Check Pipe Auto Lubricator Spray
Nozzle (Optional)
Check pipe auto lubricator spray nozzle before
startup and every 10 hours of operation. Ensure
that nozzle is free of obstructions and operates
properly. Clean as needed.
To clean
1. Rotate handle to the upward, or cleanout, position (A).
2. Operate pump until obstruction is flushed.
3. Rotate handle to the downward, or spray, position (B).
4. Clean nozzle guard. If necessary, pull handle/nozzle insert out of housing to clean with fine wire or
solvent.
Check Pipe Auto Lubricator TJC Level
(Optional)
Check pipe auto lubricator TJC level before startup
and every 10 hours of operation. Change pail as
needed. See “Drilling Unit” on page 151 for
procedure.
NOTICE: Ditch Witch
®
tool joint compound is
specially formulated to work with Ditch Witch
pipe lubrication system. Use of other tool joint
compounds will clog system. See
“Recommended Lubricants/Service Key” on
page 128 for more information.
NOTICE: Ditch Witch tool joint compound is
specially formulated to work with Ditch Witch
pipe lubrication system. Use of other tool joint
compounds will clog system. See
“Recommended Lubricants/Service Key” on
page 128 for more information.