Ditch Witch JT2020 - Manual (Page 156)

JT2020 Mach 1 Operator’s Manual
Complete the Job - 155
Antifreeze Drilling Unit
CMW
Reclaim Antifreeze
1. Connect remote fluid system. See page 93.
2. Turn on remote fluid system engine.
3. Start drilling unit and run at low throttle.
4. Move carriage to front of drill frame.
5. Position 3-gal (11-L) bucket under spindle.
6. Turn drilling fluid pump on low speed.
7. Turn drilling fluid pump off when drilling fluid comes out of spindle.
8. Open hood and pour antifreeze into tank.
IMPORTANT: Antifreeze can be removed from antifreeze tank and disposed of properly or it can be
reused until it is too diluted with drilling fluid to protect against freezing.