Ditch Witch JT2020 - Manual (Page 30)

JT2020 Mach 1 Operator’s Manual
Controls - 29
Left Control Console
CMW
5. Wrench control
To clamp front wrench, move
to right.
To unclamp front wrench,
move to left.
To clamp and rotate rear
(rotating) wrench, push.
To unclamp rear (rotating)
wrench, pull.
6. Pipe lift switch
To raise, press top.
To lower, press bottom.
7. Pipe shuttle switch
To move toward pipe box,
press top.
To move toward spindle,
press bottom.
8. Two-speed rotation
switch
To rotate at low speed, high
torque, press right.
To rotate at high speed, low
torque, press left.
Item Description Notes