Ditch Witch JT2020 User Manual
Page 177
Advertising
Service - 176
JT2020 Mach 1 Operator’s
Manual
50 Hour
CMW
Lube Rotation Gearbox Sliding Output Shaft
Lube rotation gearbox sliding output shaft with EPS every 50 hours.
To lube:
•
Stop engine and turn battery disconnect switch to the off position.
•
Clean exposed portion of sliding output shaft with pressure washer to remove grime.
•
Blow dry with compressed air.
•
Apply EPS spray lube to all exposed shaft surfaces while manually moving the shaft in and out.
•
Turn battery disconnect switch to the on position.
Inspect Thrust Rollers
Inspect thrust rollers (at each end of carriage) every 50 hours. Clean or replace if they do not turn freely.
Advertising