Ditch Witch JT2020 User Manual
Page 192
Advertising
JT2020 Mach 1 Operator’s
Manual
Service - 191
As Needed
CMW
Check Saver Sub
Check saver sub and replace as needed. See your Ditch Witch dealer for replacement parts.
To replace:
1.
Remove eight bolts that attach saver sub to spindle. Do not remove indexing dowels from spindle.
2.
Remove and replace o-ring, if necessary.
3.
Install in reverse order and torque eight bolts in a cross pattern to 47 ft•lb (64 N•m). Apply Loctite
®
242
to bolts before installation.
Replace Fuses
Change fuses as needed. Refer to decal inside panels to identify fuses.
Advertising