Ditch Witch JT2020 User Manual
Page 36
JT2020 Mach 1 Operator’s Manual
Controls - 35
Gauge Cluster
CMW
Item
Description
Notes
1. Diagnostic light (red)
If system is OK, light should
be off.
If system may not be getting
power, light should be on.
If a non-essential diagnostic
code is recorded, light should
flash on and off for 10
seconds.
If an essential diagnostic
code is recorded, light should
flash on for three seconds
and off for half a second.
See “Interpret Diagnostic Codes” on
page 147.
2. Hydraulic fluid
temperature indicator
Indicates hydraulic fluid is
overheating.
•
Check hydraulic fluid level.
•
Check cooler for debris. See
page 174.
3. Hydraulic filter service
indicator
Indicates hydraulic fluid filter
needs replacing.
Change filter when indicator lights
continuously and as indicated on
page 174.
4. Fluid pump status
indicator
If fluid pump is on, light
should be on.
If fluid pump is off, light
should be off.
NOTICE: Do not run fluid pump
without fluid.