Analyzing measurements – EXFO FastReporter 2 User Manual
Page 162
Working with OTDR Files
152
FastReporter 2
Analyzing Measurements
Analyzing Measurements
FastReporter 2 lets you analyze the unidirectional and bidirectional OTDR
measurements at any time.
The bidirectional measurements are reanalyzed when A->B or B->A
measurements are reanalyzed, and in case of the following modifications:
Event addition
Event deletion
Change in event type
Change in span start position
Change in span end position
IOR
Helix Factor
Splice Loss Threshold
Reflectance Threshold
End-of-Fiber Threshold
Analyzing measurements will:
analyze measurements acquired from different sources or with other
products.
recreate the original event table if it was modified.
reset the span start to zero and the span end to end-of-fiber, if desired.