EXFO FastReporter 2 - Manual (Page 227)

Working with iOLM files
Post Processing Software 217
Modifying iOLM Thresholds
Modifying iOLM Thresholds
The types of thresholds that you can view and modify are link and element.
Note: Since you cannot have splitters in multimode measurements and
bidirectional measurements, the corresponding threshold table will not
appear in the tab if you are working with this type of file. This also applies if
you have selected both monomode and multimode files.
To modify the iOLM thresholds:
1. Open an iOLM file.
2. Select the measurements for which you want to view or modify the
thresholds.
The current pass/fail threshold statuses are indicated in the list: green
for pass and red for fail.