EXFO FastReporter 2 - Manual (Page 337)

FastReporter 2 Examples
Post Processing Software 327
Creating a Fiber Characterization Report
Creating a Fiber Characterization Report
Throughout the network life cycle, fiber characterization reports are
essential for avoiding delays in service provisioning before system
component installation, in results comparison for post-installation
troubleshooting, and in ongoing network analysis and trending.
To create a fiber characterization report:
1. On the File menu, point to New, and click Project.
2. In the list, click the template you want to use.
3. Click OK.
4. On the File menu, click Open File.
5. Select multiple CD, OLTS, PMD, iOLM or OTDR files.
Note: You must select files with matching fiber IDs and Cable IDs.
6. Click Open to add the selected files to the project.
7. On the Settings menu, click Project Settings.
8. Click the File Matching tab.