EXFO FastReporter 2 User Manual
Page 72
Working with Projects (FR2-FC Mode)
62
FastReporter 2
Working in Loopback Mode
In the case of identifier 3 for iOLM, you can set a predefined list of
two or four items to use for each section of the measurement. The
items must be separated by a semi-colon (for example, “RX;TX”).
If you are using four items, they must all be different, or inverted
pairs (“AA;BB;CC;DD” or “AA;BB;BB;AA”). Depending on your
sequence for identifier 3, the output in the Overview page will
change.
Once you are done, click Next to proceed to the next step.
Identifier 3 Sequence Corresponding Fiber ID and Direction in
the Overview Page
RX;TX
Row 1: Fiber 0001, RX
Row 2: Fiber 0001, TX
Row 3: Fiber 0002, RX
Row 4: Fiber 0002, TX
And so on.
AA;BB;CC;DD
Row 1: Fiber 0001, AA
Row 2: Fiber 0001, BB
Row 3: Fiber 0001, CC
Row 4: Fiber 0001, DD
Row 5: Fiber 0002, AA
Row 6: Fiber 0002, BB
Row 7: Fiber 0002, CC
Row 8: Fiber 0002, DD
And so on.