EXFO FastReporter 2 - Manual (Page 206)

Working with OPM/PPM Measurements
196 FastReporter 2
Changing OPM/PPM Settings
To change OPM/PPM settings:
1. Open the file which contains OPM/PPM measurements.
2. On the Results window, click the Thresholds tab.
3. Select a wavelength or wavelengths to modify.
4. Modify the thresholds associated with the wavelengths needed by
clicking in the desired threshold value and modifying it in the table. If
you have selected more than one wavelength, all of them will be
modified at the same time.
Measurement:
OPM
Measurement:
PPM