Saving measurement files – EXFO FastReporter 2 User Manual
Page 286
Viewing and Editing Measurements
276
FastReporter 2
Saving Measurement Files
Saving Measurement Files
You can save the changes you make to selected measurement files or to all
measurement files in the current project.
To save selected measurement files:
1. In the Files tab, select the file or files that you want to save.
2. On the File menu, click Save Selected Files.
To save selected measurement files under a different name:
1. In the Files tab, select the files that you want to save.
2. On the File menu, click Save Selected Files As.
3. Select the location for your files, then click Save.
Note: If the files you have selected are for different test types and do not include
OTDR files, you can only change the location of the files.
Note: PMD files will be saved with the .pmdb extension, ConnectorMax files will
be saved with the .cmax2 extension, and OLTS files will be saved with the
.oltsx extension.
To save all files:
On the File menu, click Save All. All measurement files in the current
project and the project file are saved.