EXFO FastReporter 2 - Manual (Page 278)

Viewing and Editing Measurements
268 FastReporter 2
Editing Measurement Identification Information
4. Click in the white section to the right of a field label to select it, then
enter the desired value.
Note: The identifier labels are not editable if iOLM measurements are selected
with any other type of measurement (for example, OTDR).
Note: When the identifier label is selected as None, the values are not editable.
Modifying Auto-Increment Values for iOLM
Configuration Files
You can set auto-increment values for several items in your iOLM
measurement files.
To modify the auto-Increment values:
1. Open an iOLM configuration file.
2. Select the measurements for which you want to modify the auto
increment values.
3. In the Results window, select the Identification tab.