EXFO FastReporter 2 - Manual (Page 178)

Working with OTDR Files
168 FastReporter 2
Saving an OTDR File in a New File Format
Saving an OTDR File in a New File Format
You can save OTDR measurement files in a new file format.
To save OTDR files in a new file format:
1. In the Measurement or Files window, select the OTDR file or files that
you want to save.
2. On the File menu, click Save Selected Files As.
3. When saving a single file, type a name for the file in the File name box.
OR
When saving multiple files, click on the Save As dialog box and
select an output folder on the Browse for Folder dialog box.
4. In the Save as type list, select the appropriate file format.
5. Click Save.
Note: Some file formats (for example, Telcordia and FTB-300) do not support
multiple wavelengths in the same file. When saving to those formats,
separate files will be created for each wavelength.
I
MPORTANT
If you save an OTDR file in an older format than it was originally in,
you will lose the type of data that is not supported by the older file
format.