EXFO FastReporter 2 - Manual (Page 328)

Using FastReporter 2 Tools
318 FastReporter 2
Using the Duplicated Measurements Tool (FR2-FC Mode)
Using the Duplicated Measurements Tool
(FR2-FC Mode)
Sometimes, you might need to verify if tests were actually performed on
fibers and that the analysis or results were not just copied and pasted there
for speedy execution purposes. The duplicated measurements tool can
help you to quickly locate such files.
When you select at least two measurement files, you can have
FastReporter 2 automatically compare them and indicate which files show
the same acquisition time, measurement wavelength and module serial
number. These files can then be selected automatically so you do not have
to look for them through your list, and batch processed.
Note: For FIP, the application will match the fiber ID, test configuration name and
test date/time of the measurement to mark the measurements as
duplicated.
Note: In the case of bidirectional OTDR files, both directions are analyzed
separately.