6 working with olts files, Accepted file formats, Changing olts settings – EXFO FastReporter 2 User Manual
Page 181: Accepted file formats changing olts settings, 6working with olts files
Post Processing Software
171
6
Working with OLTS Files
Accepted File Formats
FastReporter 2 lets you work with measurement files saved in different
formats, but does not necessarily permit all operations on them.
Note: The .oltsx format includes both single- and multi-wavelength
measurements.
Note: The 64-bit version of FastReporter 2 may not support all file formats.
Changing OLTS Settings
You can change the pass/fail threshold to use for your files:
The threshold from the measurement file is the one that was used
during the actual OL test. When you select this threshold, you cannot
modify the values in the threshold table.
The threshold from the application is a threshold set by FastReporter 2,
which you can select and modify.
File format
File extension
Display
Modification
FOT-920, FOT-930,
FTB-3930
.olts
X
X
.olts2
X
X
.dat
X
X
.oltsx
X
X
ConnectorMax 2
.cmax2
X
X